Drivers and Updates


​Last Updated

Minimum Requirements

​RDI Driver 1.01 (2019-11-20)


​​​November 20, 2019

64-bit Microsoft Windows 10

​​vDAQ Firmware Update A1

​​​​August 4, 2020

64-bit Microsoft Windows 10

Installation Instructions

vDAQ hardware should be installed in the computer before following these steps. vDAQ should show up in device manager as “PCI Data Acquisition and Signal Processing Controller”.

  1. 1
    ​Download the driver above and extract its zipped contents.
  2. 2
    Right click device in device manager and select "Update driver"
  1. 3
    ​Browse to location where zip file contents were extracted and select next
  2. 4
    ​Click "Close" once installation completes. vDAQ is now ready to use!

Don't Let the Microscope Control You!